51 71 000 Removing and installing / replacing seal on front door, left or right: Notes
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Follow Repair Instructions for bonded seals.
- Remove Cover On Inside Door Window Frame
- Release Door Retainer From Door Pillar
NOTE:
The positioning of the seal must be established in three areas of the front door with positioning aids to be stuck on.
Positioning aids are included with new seals.
Position of seal (3) on front door:
Area (A) at distance (G) to door rabbet.
Area (B) at line (1) of positioning aids (2) to be stuck on (see following work steps).
Area (C) at distance (E) to door inner panel.
Area (D) at distance (F) to door fold.
Clean bonding surfaces on paint with adhesive cleaner.
E = 57 mm
F = 4 mm
G = 2.8 mm