51 16 210 Removing and installing/replacing trim for preselector lever
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
- 00 9 340
Necessary preliminary tasks:
- Apply parking brake
- Move selector lever into N position
- Remove Gaiter for shift block
Attach special tool 00 9 340 as illustrated.
Lever out trim (1) all round.
Disconnect associated plug connections and remove trim (1) towards top.
Installation:
Catches (1) on trim (2) must not be damaged.
Make sure catches (1) are correctly seated in associated mountings of trim (2).