25 16 065 Replacing gaiter (selector lever cover) for shift tower

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove grip

Carefully pull gaiter taut on leather
Gently press frame inwards until catch is released
Lift out gaiter

Fig 1: Removing Gaiter
Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Start removing at top left, otherwise the frame will be damaged.

Installation:

Retaining lugs must not be damaged.

Fig 2: Identifying Gaiter Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.