61 31 068 Removing and installing/replacing switch for passenger airbag deactivation
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Read and comply with Safety Regulations
for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Disconnect Battery Negative Lead
- Remove Side Cover On Right From Instrument Panel
Unlock catches (1) and remove switch for front passenger airbag deactivation (2) towards front side of cover.
Installation:
Make sure switch for front passenger airbag deactivation (2) is installed in correct position.