64 12 089 Removing and installing or replacing muffler/silencer
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Scalding hazard!
Work on independent heating may only be carried out when it has cooled down.
Necessary preliminary tasks:
- Remove Front Bumper Trim
Release screws (1, 2) and remove muffler/silencer (3).
For tightening torque refer to 64 12 1AZ in 64 12 INDEPENDENT HEATER .