7.1 Measuring options
An overview of all measuring options and values (VA = front axle, HA = rear axle) is shown below.
MEASURING OPTIONS
| Measuring options | Measuring accuracy | In measuring range | Total measuring range |
|---|---|---|---|
| Total wheel toe (VA + HA) | ± 2' | ± 2° | ± 18° |
| Single wheel toe (VA + HA) | ± 2' | ± 2° | ± 9° |
| Camber (VA + HA) | ± 1' | ± 3° | ± 10° |
| Wheel displacement (VA) | ± 2' | ± 2° | ± 9° |
| Geometrical drive axis | ± 2' | ± 2° | ± 9° |
| Castor | ± 4' | ± 18° | ± 22° |
| Kingpin inclination | ± 4' | ± 18° | ± 22° |
| Toe-differential angle | ± 4' | ± 20° | ± 20° |
| Maximum steering angle (VA) | ± 4' | ± 60° | ± 300° |
| Maximum steering angle (HA) | ± 4' | ± 9° | ± 9° |
| Castor correction range | ± 4' | ± 7° | ± 10° |
NOTE:
The measuring accuracy details only apply when using the precision rotating and sliding plates as well as the BMW quick-acting clamps.