61 67 200 Removing and installing/replacing washer jet for Night Vision camera

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove MIDDLE LEFT RADIATOR GRILLE

Release screws (1).

Remove high-pressure nozzle (2) from Night Vision camera (3).

Installation note:

New washer jet is already preset.

Run a function check.

Fig 1: Identifying High-Pressure Nozzle From Night Vision Camera And Screws

Courtesy of BMW OF NORTH AMERICA, INC.