51 13 001 Removing and installing/replacing front radiator grille, middle left or right

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove ENGINE COMPARTMENT LID SEAL in working area

Version with night vision:

Release camera fixing screw (1) and remove.

Fig 1: Identifying Bumper Retaining Screw

G09925803

Courtesy of BMW OF NORTH AMERICA, INC.

Press middle front radiator grille (1) upwards and pull in direction of arrow towards front.

Fig 2: Pressing Middle Front Radiator Grille

G09925804

Courtesy of BMW OF NORTH AMERICA, INC.

Version with night vision:

Release plug connection (2) and high-pressure nozzle line (3) on night vision camera (1) and disconnect.

Fig 3: Identifying Plug Connection, High Pressure Nozzle Line And Vision Camera

G09925805

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

All catches and guides on middle front radiator grille must not be damaged.

Press on chrome ring to push front radiator grille (2) into bumper trim.

Fixtures (1) must engage correctly.

Fig 4: Pushing Front Radiator Grille

G09925806

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove NIGHT VISION CAMERA .