34 52 550 Removing and installing/replacing DSC yaw sensor (DSC sensor)
Necessary Preliminary Tasks:
- Remove rear center console. Refer to 51 16 216 REMOVING AND INSTALLING REAR CENTER CONSOLE .
NOTE:
The DSC sensor contains the functions of the transversal acceleration sensor and the rotation rate sensor.
Unlock and disconnect plug (1). Release screws (2) and remove DSC sensor.
Installation:
Tightening torque, (8 N.m.).
IMPORTANT:
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.