Removal and Installation
- Release the 2 instrument cluster finish panel screws covers and remove the 2 instrument cluster finish panel screws.
- Remove the steering wheel. For additional information, refer to REMOVAL AND INSTALLATION .
- Remove the multifunction switch. For additional information, refer to REMOVAL AND INSTALLATION .
- Remove the LH instrument panel finish panel.
- Pull the LH instrument panel finish panel toward the rear of the vehicle to release the retaining clips.
- Remove the instrument cluster finish panel.
- Pull the instrument cluster finish panel toward the rear of the vehicle to release the retaining clips.
- To install, reverse the removal procedure.
- If replacing the instrument cluster finish panel, remove the 2 register screws and transfer the register.
- Make sure to align the LH instrument panel finish panel retaining clips to the retaining clip holes in the instrument panel.