LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1899 (Engine Controls - Pinpoint Test JE: Integrated Ignition Coil Pack A, B, Or C Failure Through Pinpoint Test KP: Charge Air Cooler (CAC) Pump - (Except Diesel & Hybrid)) >> Pinpoint Test KE: Idle Air Control (IAC) Valve >> Notes

Pinpoint Test KE: Idle Air Control (IAC) Valve: Notes

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Proceed to DTC testing steps listed in FAULT CODE SETTING CONDITION  table of fault code setting condition.
FAULT CODE SETTING CONDITION

Fault Code Setting Condition Testing
P0505, P0506, P0511, P1504, P1507 KOEO, KOER, Continuous Memory  KE1
P0507, P1506 KOEO, KOER, Continuous Memory  KE14