LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Engine Mechanical - 5.4L (4V)) >> In-Vehicle Servicing >> Timing Drive Components >> Removal

Timing Drive Components: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the camshaft roller followers. For additional information, refer to Valve Train Components - Exploded View  and Camshaft Roller Follower .
  2. Remove the engine front cover. For additional information, refer to Engine Front Cover .
  3. Remove the crankshaft sensor ring.
    4. Fig 1: Locating Crankshaft Sensor Ring
    GF0000401Courtesy of FORD MOTOR CO.
  4. Remove the crankshaft washer.
    5. Fig 2: Locating Crankshaft Washer
    GF0046344Courtesy of FORD MOTOR CO.
  5. Remove the 2 bolts and the RH primary timing chain tensioner.
    6. Fig 3: Locating RH Primary Timing Chain Tensioner Bolts
    GF0000402Courtesy of FORD MOTOR CO.
  6. Remove the RH primary timing chain tensioner arm.
    7. Fig 4: Locating RH Primary Timing Chain Tensioner Arm
    GF0000403Courtesy of FORD MOTOR CO.
  7. Remove the RH primary timing chain.
    8. Fig 5: Identifying RH Primary Timing Chain
    GF0000404Courtesy of FORD MOTOR CO.
  8. Remove the 2 bolts and the RH primary timing chain guide.
    9. Fig 6: Locating RH Primary Timing Chain Guide Bolts
    GF0000405Courtesy of FORD MOTOR CO.
  9. Remove the 2 bolts and the LH primary timing chain tensioner.
    10. Fig 7: Locating LH Primary Timing Chain Tensioner Bolts
    GF0000406Courtesy of FORD MOTOR CO.
  10. Remove the LH primary timing chain tensioner arm.
    11. Fig 8: Locating LH Primary Timing Chain Tensioner Arm
    GF0000407Courtesy of FORD MOTOR CO.
  11. Remove the LH primary timing chain.
    12. Fig 9: Locating LH Primary Timing Chain
    GF0000408Courtesy of FORD MOTOR CO.
  12. Remove the 2 bolts and the LH primary timing chain guide.
    13. Fig 10: Locating LH Primary Timing Chain Guide Bolts
    GF0000409Courtesy of FORD MOTOR CO.
  13. Remove the crankshaft sprocket.
    14. Fig 11: Locating Crankshaft Sprocket
    GF0000410Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals