LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (Ic), Message Center And Warning Chimes >> Principles of Operation >> Warning Chimes >> Safety Belt Warning Chime

Safety Belt Warning Chime

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver or passenger safety belt is not fastened and the ignition key is turned from the OFF/LOCK or ACC to the ON or START position.

The safety belt warning chime stops sounding when the safety belt is fastened, the ignition key is turned from the ON or START position to the OFF/LOCK or ACC position, or the chime sounds for approximately 6 seconds.

The safety belt warning chime inputs are the: