LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (Ic), Message Center And Warning Chimes >> Principles of Operation >> Instrument Cluster >> Safety Belt Warning Indicator

Safety Belt Warning Indicator

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt switches are hardwired to the RCM and the RCM monitors the safety belt switch position. The RCM communicates the safety belt information to the LCM over the SCP which is then relayed to the instrument cluster (IC) over the SCP network to turn on or off the safety belt warning indicator according to the safety belt switch position.

scientia non olet · About LEMON Manuals