LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Interior Door Handle >> Removal

Interior Door Handle: Removal

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. For additional information, refer to REMOVAL AND INSTALLATION or REMOVAL AND INSTALLATION .
  2. Remove the bolt and position the interior door handle aside.
  3. Disconnect the interior door handle actuating cable and remove the interior door handle.