LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1182 (Engine Controls - Diagnostic Methods (Except Diesel & Hybrid)) >> Intermittent Diagnostic Techniques >> Recreating the Fault

Recreating the Fault

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2009 Mercury Mountaineer, 2009 Mercury Milan, 2009 Mercury Mariner, 2009 Mercury Grand Marquis, and 2009 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Recreating the concern is the first step in isolating the cause of the intermittent symptom. A thorough investigation should start with the customer information worksheet located in the back of this article. If freeze frame data is available, it may help in recreating the conditions at the time of a malfunction indicator lamp diagnostic trouble code (MIL DTC). Listed below are some of the conditions for recreating the concern:

CONDITIONS TO RECREATE FAULT 

RECREATE FAULT REFERENCE

Engine Type Conditions Non-Engine Type Conditions
Engine Temperature Ambient Temperature
Engine RPM Moisture Conditions
Engine Load
Engine idle/accel/deceleration
Road Conditions (smooth-bumpy)