Instrument Cluster & Panel Lighting - Inspection & Verification
- Verify customer concern by operating the instrument cluster and panel lighting system.
- Visually inspect the following components of the instrument cluster and panel lighting system, see VISUAL INSPECTION TABLE
.VISUAL INSPECTION
Mechanical Electrical Sticking Or Binding Light Switch Rheostat Resistor Blown Fuse: 15A TAIL LAMP, 10A ELECTRON BAT Loose Or Corroded Connections Damaged Wiring Harness Damaged Light Switch Rheostat Resistor Damaged Switches Damaged Or Loose Lamps - If fault is not visually evident, repair by symptom. See SYMPTOM INDEX table under PINPOINT TESTS.