Instrument Cluster & Panel Lighting - Inspection & Verification

Verify customer concern by operating the instrument cluster and panel lighting system.

Visually inspect the following components of the instrument cluster and panel lighting system, see VISUAL INSPECTION TABLE .

VISUAL INSPECTION

Mechanical	Electrical
Sticking Or Binding Light Switch Rheostat Resistor	Blown Fuse: 15A TAIL LAMP, 10A ELECTRON BAT
Loose Or Corroded Connections
Damaged Wiring Harness
Damaged Light Switch Rheostat Resistor
Damaged Switches
Damaged Or Loose Lamps

If fault is not visually evident, repair by symptom. See SYMPTOM INDEX table under PINPOINT TESTS.