LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2354 (Information Center - Instrumentation, Message Center, & Warning Chimes -- F250-F550 Super Duty) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before deactivating/activating the Belt-Minder®, apply the parking brake.
  2. Place the gearshift in the PARK (P) position (automatic transmission) or the NEUTRAL (N) position (manual transmission).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt.
  6. Place the headlamp switch in the OFF position.