Adjust Rear-Axle Toe - AR40.20-P-0261S
Model 223
except code 201 (Rear axle steering)
except code 216 (Rear axle steering)
MODIFICATION NOTES
| 30.03.2021 | Nut, tie rod to rear axle beam | Model 223 with code Z07 | BA35.20-P-1009-04P |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Measure | |||
| 1 | Carry out input measurement. | AR40.20-P-0200S | |
| Adjust | |||
| 2 | Unfasten nut (1). | ||
| 3 | Adjust toe using cam bolt (2). | Assign suspension data | AR40.20-P-0203S |
| Fig 1 | |||
| Fig 2 | |||
| 4 | Tighten nut (1). | except code 201 (Rear axle steering) except code 216 Rear axle steering except code Z07 B7 armoring on special protection version) Model 223 with code Z07 (B7 armoring on special protection version) except code 201 (Rear axle steering) except code 216 (Rear axle steering) Nut/Screw, tie rod on rear axle beam |
*BA35.20-P-1009-04P |
| Fig 1 | |||
| Fig 2 | |||
| Measure | |||
| 5 | Carry out output measurement. | AR40.20-P-0200S |
TIE ROD
| Number | Designation | Model 223 except code Z07 | Model 223 with code Z07 | ||
|---|---|---|---|---|---|
| BA35.20-P-1009-04P | Nut/Screw, tie rod on rear axle beam | Stage 1 | Nm | 90 | 90 |
| Stage 2 | ∠° | - | 45 | ||