Remove/Install Fuel Injection Valves (ME-SFI) - AR07.03-P-6520SVZ
Engine 279 in model 223
Shown on injection valve (Y62/7)
| Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notice | Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | |
| Remove/install | |||
| 1 | Remove fuel distributor (1) together with injection valves (Y62/1, Y62/2, Y62/3, Y62/4, Y62/5, Y62/6, Y62/7, Y62/8, Y62/9, Y62/10, Y62/11, Y62/12). | AR07.03-P-1451SVZ | |
| 2 | Pull off retaining clamp (2) and pull corresponding injection valve (Y62/1, Y62/2, Y62/3, Y62/4, Y62/5, Y62/6, Y62/7, Y62/8, Y62/9, Y62/10, Y62/11, Y62/12) out of fuel distributor (1). | Anti-twist lock on retaining clamp (2) must engage in square (arrow). |
|
| Antifriction paste, rubber parts 2.5 kg, DBL 6867.00 | *BR00.45-Z-1002-06A | ||
| Fig 1 | |||
| Check | |||
| 3 | Check injection valves (Y62/1, Y62/2, Y62/3, Y62/4, Y62/5, Y62/6, Y62/7, Y62/8, Y62/9, Y62/10, Y62/11, Y62/12) for wear and damage. | If damage or wear is present, ↓ Replace corresponding injection valve (Y62/1, Y62/2, Y62/3, Y62/4, Y62/5, Y62/6, Y62/7, Y62/8, Y62/9, Y62/10, Y62/11, Y62/12). |
|
| 4 | Install in the reverse order. |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1002-06A | Antifriction paste, rubber parts 2.5 kg, DBL 6867.00 | A 000 989 01 60 |