Remove/Install Purging Pressure Sensor - AR47.30-P-8260SVZ
Engine 279 in model 223
| Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Topical note | Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | |
| Remove/install | |||
| 1 | Remove Engine cover. | AR01.10-P-2405SVZ | |
| 2 | Position air extraction system in working area and switch on. | ||
| 000 588 00 85 00 Air extraction system | WS47.00-P-0039B | ||
| 3 | Release electrical connector (1) and disconnect. | ||
| 4 | Twist purging pressure sensor (B108) in the direction of the arrow and remove. | ||
| Fig 2 | |||
| Check | |||
| 5 | Check purging pressure sensor (B108) for damage. | If damage is present, ↓ Replace purging pressure sensor (B108). |
|
| 6 | Check purge line (2) for damage. | If damage is present, ↓ Replace purge line (2). |
|
| 7 | Install in the reverse order. | ||
| Check | |||
| 8 | Read out and delete fault memory using vehicle diagnosis system. | ||
| AD00.00-P-2000-06FR | |||
| Risk of burn injuries , suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | AS49.00-Z-0001-01A | |
| Risk of accident from vehicle starting off by itself when Engine running. Risk of injury (bruises and burns) resulting from working on the Engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 9 | Perform Engine test run and check Engine for proper operation and leak tightness. |