Remove/Install Oil Feed Line For Left Turbocharger - AR09.40-P-0002SVZ

Engine 279 in model 223

Courtesy of MERCEDES-BENZ USA

Shown with engine removed

	Risk of injury . Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil	Wear protective gloves, protective clothing and safety glasses. Do not fill engine oil into beverage containers.	AS18.00-Z-0001-01A
Notice	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Remove/install
1	Remove coolant feed line of left exhaust gas turbocharger.	: Do not install engine cover until after the leak test.	AR09.41-P-0011SVZ
2	Remove screw (2).	Bolt, oil feed and coolant line pipe to turbocharger	*BA09.40-P-1004-01V
3	Remove screws (3).	: Position screw (2). Bolt, oil feed to bottom half of crankcase	*BA09.40-P-1005-01V
4	Remove oil feed line (1).	Plug openings. : Replace seal (4) and O-ring (5). Assembly tool	Fig 1
		Record plug	Fig 2
5	Remove seal (6) of oil feed line of right exhaust gas turbocharger.	If required.	AR09.40-P-0003SVZ
	Check
6	Check oil feed line (1) for damage.	If damage is present: ↓ Replace oil feed line (1).
7	Install in the reverse order.
	Check
8	Check and correct engine oil level using instrument cluster.
			AP18.00-P-1812A
	Risk of burn injuries , suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.	Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.	AS49.00-Z-0001-01A
	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
9	Carry out engine test run and check engine for proper operation and leak tightness.