Remove/Install Rear Trim Strip On Window Frame Of Front Door - AR72.10-P-0001SG

Model 223 

with code Z07 (B7 armoring on special protection version) 

with code Z11 (Left front power window with special protection) 

Model 223 

with code Z07 (B7 armoring on special protection version) 

with code Z12 (Right front power window with special protection) 

Courtesy of MERCEDES-BENZ USA

Notice	Notes on avoiding damage to windows installed in special high-security vehicles		AH67.00-P-0003-01FB
	Remove/install
1	Move right and/or left front door side window to lowest position.
2	Remove lower trim strip (2) at window frame of front door.		AR72.10-P-1713S
3	Release window guide seal (3) in area of rear trim strip (1) (arrows).	Lubricant, rubber assembly 1 L	*BR00.45-Z-1010-06A
		Long wedge	Fig 1
4	Remove screws (4).
5	Remove rear trim strip (1).
6	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA