Remove/Install Rear Door Control Unit - AR72.29-P-1101S
Model 223
Shown on right rear door
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Perform commissioning of rear door control unit (N69/3, N69/4). | Only where rear door control unit (N69/3, N69/4) is replaced. | |
| AD00.00-P-2000-06FR | |||
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Remove door trim. | AR72.12-P-1011S | |
| 4 | Disconnect electrical connectors from rear door control unit (N69/3, N69/4). | ||
| 5 | Unclip and remove rear door control unit (N69/3, N69/4). | ||
| 6 | Install in the reverse order. |