Remove/Install Front Door Lock - AR72.10-P-4011SGA

Model 223 

with code Z07 (B7 armoring on special protection version) 

Courtesy of MERCEDES-BENZ USA

Fig 1: Front Door Lock Components Location - Model 223 With Code Z07

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove corresponding front door side window.		AR67.30-P-0008SG
2	Unscrew bolts (1) and remove armor plate (2).	Screw, protective plate to front door	*BA72.10-P-1017-01BA
3	Unscrew screws (3) and remove rail (4).
4	Detach cable (5) at front door lock (A85, A85/1).
5	Unscrew screws of bearing bracket (6).
6	Unscrew screws (7) and remove front door lock (A85, A85/1) with cables (8) and bearing bracket (6) until cable (9) at front door lock (A85, A85/1) can be accessed.
7	Detach cable (9) of power closing actuator motor (M14/21, M14/22) at front door lock (A85, A85/1).
8	Remove front door lock (A85, A85/1) with cables (8) and bearing bracket (6) from front door.
9	Detach cables (8) at bearing bracket (6).	If bearing bracket (6) will be replaced.
10	Install in the reverse order.