Remove/Install Armrest Lid On Center Console - AR68.20-P-2370S
Model 223
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1.1 | Remove rear cover from center console. | Model 223 except code 224 (Rear individual seat design) |
|
| AR68.20-P-2358S | |||
| 1.2 | Remove rear center console. | Model 223 with code 224 (Rear individual seat design) |
|
| AR68.20-P-2020S | |||
| 2 | Unclip and remove cover (1). | Fig 1 | |
| 3 | Disconnect electrical connectors (2) and unclip the plug housing from the center console. | Model 223 with code 906 (Front armrest heater) |
|
| 4 | Remove screws (3). | ||
| 5 | Unclip cover trim (4). | Fig 1 | |
| 6 | Remove screws (5). | ||
| 7 | Remove armrest cover (6). | ||
| 8 | Install in the reverse order. |