Remove/Install Rear Door Window Frame Lining - AR72.12-P-0008S

Model 223 

except code Z07 (B7 armoring on special protection version) 

Shown on model 223.1 

Courtesy of MERCEDES-BENZ USA

Shown on model 223.9 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear door trim.		AR72.12-P-1011S
2	Unclip window frame lining (1) and remove	Long wedge	Fig 1
3	Remove remaining retaining clip from window frame and install in window frame lining (1).	Long wedge	Fig 1
4	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA