Retrofit Illuminated Door Sill Molding With Mercedes-Benz Lettering - AZ82.20-P-0005MFC
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118
except code 877 (Ambient lighting)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Topical note | Notes on retrofitting electrical/optical lines | AH82.00-P-0000-01A | |
| Remove | |||
| 1 | Move driver's and front passenger seat backward. | ||
| 2 | Remove right and left inner door sills. | ||
| AR68.30-P-4101MFA | |||
| 3 | Release door seals in right and left entrance area. | ||
| 4 | Remove right and left door sills. | Fig 1 | |
| 5 | Unscrew nut on cover of lower steering shaft in driver footwell and remove cover. | ||
| 6 | Release vehicle interior fuse and relay module. | ||
| AR54.15-P-1312MFA | |||
| Install | |||
| 7 | Retrofit electrical wiring harness for illuminated door sill molding. | AZ82.20-P-0005-01MFC | |
| Topical note | Notes on the use of paint scraping nuts on ground connections | AH00.19-P-1000-20A | |
| *BA00.19-P-1019-02E | |||
| 8 | Retrofit front left illuminated door sill molding (E17/47) and front right illuminated door sill molding (E17/48). | AZ82.20-P-0005-10MFC | |
| Cleaner | *BR00.45-Z-1025-04A | ||
| 9 | Retrofit illuminated door sill moldings control unit. | AZ82.20-P-0005-05MFC | |
| Binder Duotec® Pilz in Pilz Klett - with adhesive 32 | *BR00.45-Z-1084-02A | ||
| 10 | Install remaining parts. | ||
| Check | |||
| 11 | Carry out operational check. | Automatic shutoff takes place after approx. 5 min. |
|
| Update Vehicle Documentation (VeDoc) | |||
| 12 | Attach note "Illuminated door sill moldings with Mercedes-Benz lettering at front retrofitted as per AR82.20-P-0005MFC" under field organization texts on DG 68 and DG 82. |
GROUND POINTS
| Number | Designation | Model 118 | |||
|---|---|---|---|---|---|
| BA00.19-P-1019-02E | Right front footwell ground point | W15 | M6 | Nm | 10 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1025-04A | Cleaner | A 005 989 19 71 |
| BR00.45-Z-1084-02A | Binder Duotec® Pilz in Pilz Klett - with adhesive 32 | Klettband Technik Schultz UG Schulstrasse 6 71111 Waldenbuch Germany Tel.: +49 (0) 7157 6754-83 or 82 Fax: +49 (0) 7157 6696815 info@klettband-technik.de http://www.klettband-technik.de |
PARTS ORDERING NOTE
| Part no. | Designation | Quantity |
|---|---|---|
| KG98 (see XENTRY Portal Parts information) | Parts kit for illuminated door sill moldings with Mercedes-Benz lettering. | 1 |