Tightening Procedure For Charge Air Manifold - AR09.41-P-1312-01MT
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133 in model 117, 156, 176
Engine 260 in model 118, 177, 247
Engine 270 in model 117, 156, 176, 242, 246.2
INTAKE MANIFOLD
| Number | Designation | Engine 260 | Engine 270 | |
|---|---|---|---|---|
| BA09.20-P-1001-01U | Screw/bolt, charge air distributor to cylinder head | Nm | 14 | 14 |
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 133 | |
|---|---|---|---|
| BA09.41-P-1001-01T | Bolt, charge air distributor to cylinder head | Nm | 9 |
Engine 270
- Tighten the bolts (1 to 5) for the charge air distributor in numerical order. Engine 270 in model 117, 156, 176, 242, 246.2
.
Engine 260
- Tighten the bolts (1 to 5) for the charge air distributor in numerical order. Engine 260 in model 177
Engine 133
- Tighten the bolts (1 to 5) for the charge air distributor in numerical order. Engine 133 in model 117, 156, 176