Remove/Install Divert Air Switchover Valve - AR09.40-P-3000MFC

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)

Fig 1: Divert Air Switchover Valve Components Location - Model 118 In Engine 260 With Code M016

Courtesy of MERCEDES-BENZ USA

	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Notice	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Remove/install
1	Remove charge air cooler.		AR09.41-P-0105MFC
2	Remove bolts (1).	Bolt, solenoid valve to charge air cooler	*BA09.41-P-1001-01KOA
3	Remove the overrun mode bypass air switchover valve (Y101) and seal the opening on the charge air cooler with suitable stop plugs.	: Replace seal.
		Set of plugs	Fig 2
4	Install in the reverse order.

CHARGE AIR PIPE/CHARGE AIR COOLING

Number	Designation		Engine 260.9
BA09.41-P-1001-01KOA	Bolt, solenoid valve to charge air cooler	Nm	8

Fig 2: Identifying Set Of Plugs (199 589 00 98 00)

Courtesy of MERCEDES-BENZ USA