Remove/Install Panoramic Sliding Sunroof Wind Deflector Bearing - AR77.21-P-0102MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177
with code 413 (Automatic panoramic sliding sunroof)
Shown on left side of vehicle
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/install | |||
| 1 | Remove wind deflector for panoramic sliding sunroof. | AR77.21-P-0101MFA | |
| 2 | Lift catch tab (1) with a suitable tool, push bearing (2) out backward in direction of arrow and remove. | Carefully release and move out bearing (2). The guides may otherwise be damaged. |
|
| 3 | Install in the reverse order. |