LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> GLA250 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Electrical System, Equipment & Instruments (2 Of 3) -- 118 Chassis) >> Testing & Repair >> Remove/Install Start/Stop Switch - AR54.25-P-4000MFA

Remove/Install Start/Stop Switch - AR54.25-P-4000MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 243, 247 

Fig 1: Start/Stop Switch Components Location - Model 118
G16050542Courtesy of MERCEDES-BENZ USA

Shown on model 118 

G16050543Courtesy of MERCEDES-BENZ USA

Shown on model 247.6 

Notice  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Disconnect ground line from battery.   AR54.10-P-0003MFA 
2 Remove trim element (2) with center air vents.   AR83.10-P-4509MFA
3 Release catch hooks (1) a remove start/stop button (S2/2).    
4 Install in the reverse order.