Check Tires For Damage And Crack Formations - AP40.10-S-4051E

Model 907 

Shoulder wear on tire 

Center wear on tire 

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Preparatory activity
1	Lift/jack up vehicle
		Model 907	AR00.60-D-1000-04TS
	Check
2	Check tires of front and rear axle.	Tread, as well as outer and inner sidewalls, may have cuts, punctures, cracks, chipping, peeling and penetrating foreign objects. If problems occur, ↓ rectify the problems. After obtaining special order.
3	Assess wear pattern and tire tread depth of front and rear axle.	Only if the reception items as per the "Reception report for service on vehicle" were not carried out. If an unusual wear pattern is present, ↓ determine cause and replace the tire, if necessary. After obtaining special order. If the minimum tread depth is reached, ↓ replace the tire. After obtaining special order.	AP40.10-S-4052P
	Finishing activity
4	Lower vehicle.
		Model 907	AR00.60-D-1000-04TS