Check Condition Of Suspension Struts Or Shock Absorbers And Springs - AP32.25-S-3255E
Model 907
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Preparatory activity | |||
| 1 | Lift/jack up vehicle | ||
| Model 907 | AR00.60-D-1000-04TS | ||
| Check | |||
| 2 | Check all shock absorber for external leaks. | ||
| Model 907 | AR32.25-D-0121-02A | ||
| If problems occur, ↓ Replace shock absorbers per axle. |
|||
| 3 | Check all shock absorbers for external damage, deformation and corrosion. | ||
| Model 907 | AR32.25-D-0121-01A | ||
| If problems occur, ↓ Replace shock absorbers per axle. |
|||
| 4 | Check condition and seating of springs. | Damage can occur otherwise. If problems occur, ↓ rectify the problems. |
|
| 5 | Check condition of the elastomer bearings. | If problems occur, ↓ rectify the problems. |
|
| 6 | Check spring retainers in visible area for correct seating, damage and deformation. | If problems occur, ↓ rectify the problems. |
|
| 7 | Check auxiliary rubber springs in visible area for correct seating, damage and deformation. | If problems occur, ↓ Replace damaged auxiliary rubber springs. |
|
| Finishing activity | |||
| 8 | Lower vehicle. | ||
| Model 907 | AR00.60-D-1000-04TS |