Remove/Install Rear Body Acceleration Sensor - AR32.22-P-0005ME
Model 167
With Code 490 (Electrohydraulic suspension)
Fig 1: Left Rear Body Acceleration Sensor Components Location - Model 167 With Code 490 (Shown On Model 167.1)
Shown on model 167.1
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove left load compartment trim. | Model 167.1 with code 490 (Electrohydraulic suspension) |
AR68.30-P-4800ME |
| Model 167.3 with code 490 (Electrohydraulic suspension) |
AR68.30-P-1185MEC | ||
| Model 167.9 with code 490 (Electrohydraulic suspension) except code M036 (Maybach version) |
AR68.30-P-1185MEX | ||
| Model 167.9 with code 490 (Electrohydraulic suspension) with code M036 (Maybach version) |
AR68.30-P-1185MEM | ||
| 2 | Disconnect electrical connector (1). | ||
| 3 | Remove nut (2). | ||
| 4 | Remove left rear body acceleration sensor (B24/5). | ||
| 5 | Install in the reverse order. |