Replace Propeller Shaft Pilot Bushing - AR41.10-P-0250MSA
Model 257 with engine 256, 264
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notice | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A | |
| Remove | |||
| 1 | Remove propeller shaft (1). | AR41.10-P-0050MSA | |
| 2 | Separate propeller shaft (1) at slide joint. | ||
| 3 | Remove flex disks (12). | AR41.10-P-0040-01MSA | |
| Drift for releasing the fitting sleeves in the flexible couplings | WF58.50-P-4110-01A | ||
| Fig 1 | |||
| 4 | Remove pilot bushings (10). | AR41.10-P-0250-02MSA | |
| Install | |||
| 5 | Pack cavity of front and rear pilot bushing (10) with grease. | ||
| Multipurpose grease (NLGI Class 2) | BB00.40-P-0267-00A | ||
| 6 | Press in pilot bushings (10). | AR41.10-P-0250-03MSA | |
| Model 257 with engine 256, model 257 with engine 264 Press-in dimension "a" from face end of pilot bushing to joint flange | *BE41.10-P-1001-04Q | ||
| 7 | Install flex disks (12). | AR41.10-P-0040-01MSA | |
| *BA41.10-P-1001-01M | |||
| Fig 1 | |||
| 8 | Connect propeller shaft (1) to slide joint. | AR41.10-P-0050-05MSA | |
| Long-life grease | *BR00.45-Z-1001-06A | ||
| 9 | Install propeller shaft (1). | AR41.10-P-0050MSA |
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT
| Number | Designation | Model 257.321/323/348/350 Model 257.359 2# except code 460 (Canada version) except code 494 (US version) | Model 257.344/351 Model 257.359 1# except code 460 (Canada version) except code 494 (US version) | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-04Q | Press-in dimension "a" from face end of pilot bushing to joint flange | Front propeller shaft | mm | 24, 80 | 23, 30 |
| Rear propeller shaft | mm | 36, 30 | 26, 80 | ||
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT
| Number | Designation | Model 257.359 with code 460 (Canada version) Model 257.359 with code 494 (US version) | ||
|---|---|---|---|---|
| BE41.10-P-1001-04Q | Press-in dimension "a" from face end of pilot bushing to joint flange | Front propeller shaft | mm | 23, 30 |
| Rear propeller shaft | mm | 34, 80 | ||
PROPELLER SHAFT
| Number | Designation | Model 257 | |||
|---|---|---|---|---|---|
| BA41.10-P-1001-01M | Flexible coupling to transmission/rear axle differential or propeller shaft | Direct threaded connection | Stage 1 | Nm | 60 |
| Stage 2 | ∠° | 90 | |||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |