Remove/Install Roller Sunblind For Side Window - AR68.50-P-0004MEM

Model 167.9 With Code M036 (Maybach version) 

Courtesy of MERCEDES-BENZ USA

Shown on the left side of vehicle 

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Fully retract roller sunblind.
2	Remove front part of rear shelf.		AR68.30-P-0031MEM
3	Release electrical connector (1) and disconnect.
4	Release, disconnect electrical connector (2) and detach electric lines at roller sunblind (3) (arrow).
5	Unclip plug housing (4) from roller sunblind (3) and place to one side.
6	Mark position of roller sunblind (3) relative to body.
7	Remove screw (6).	Screw, roller sunblind to side wall	*BA68.50-P-1005-03F
8	Remove nuts (5).	Align roller sunblind (3) with markings. Nut, roller sunblind to side wall	*BA68.50-P-1006-03F
9	Guide out roller sunblind (3) and remove.	Ensure that roller sunblind (3 is correctly positioned on side wall.
10	Install in the reverse order.