Remove/Install Front Rear Shelf - AR68.30-P-0031MEM

Model 167.9 

With Code M036 (Maybach version) 

Shown on left side of vehicle With Code 224 (Design individual rear seat system) 

Courtesy of MERCEDES-BENZ USA

Shown on left side of vehicle With Code 224 (Design individual rear seat system) 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove D-pillar trim.		AR68.30-P-4497MEM
2	Remove trim strips (1, 2, 3) at left and right side of vehicle.		AR68.30-P-1460MEM
3	Remove screw of left and right trim (4), unclip and remove trims (4).	Long wedge	Fig 2
4	Remove screws of trim (5), move out trim (5) towards front and remove.
5	Remove expansion rivet (6) at left and right side of vehicle.	Dismantling tool	Fig 1
6	Remove bolts (7) at left and right side of vehicle.
7	Remove screw (8) at left and right side of vehicle.
8	Release and disconnect electrical connection (9).
9	Remove screws (10).
10	Slightly pull frame (11) upwards and remove front rear shelf (12) towards rear out of vehicle.	Aid of helper required.
11	Install in the reverse order.

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA