Remove/Install Rear Engine Mount - AR22.10-P-1160MSA

Engine 256.9 in model 213, 238, 257, 290 

Shown with CODE M005 (4MATIC) 

Fig 1: Rear Engine Mount Component Location - Engine 256.9 In Model 257 (Shown With Code M005)

Courtesy of MERCEDES-BENZ USA

	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
Notice	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
	Remove/install
1	Remove center and rear lower engine compartment lining.	Engine 256.9 in model 213, 238	AR61.20-P-1105LWE
		Engine 256.9 in model 290	AR61.20-P-1105FRX
		Engine 256.9 in model 257	AR61.20-P-1105FR
2	Support transmission (4).
	000 588 10 62 00 Support plate		WS26.00-P-3309B
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
3	Remove engine carrier (2).		AR22.10-P-4360MSA
4	Remove screws (1d) and remove engine mount (1).	Engine 256.9 in model 238 except code M005 (Vehicles with 4MATIC/all-wheel drive)	*BA22.10-P-1003-03O
		Engine 256.9 in model 238 with code M005 (Vehicles with 4MATIC/all-wheel drive) Bolt, rear engine mount to bracket transmission
		Engine 256.9 in model 213, 257, 290 Bolt, rear engine mount to bracket/transmission	*BA22.10-P-1003-03N
5	Install in the reverse order.