Remove/Install Wheels - Ar40.10-D-1100TS
Model 907
MODIFICATION NOTES
| 14.03.2018 | Document reference revised. | Operation step 1 | |
| 31.08.2018 | Document content completely revised | ||
| 04.12.2019 | Wheel nut | BA40.10-N-1002-01TS | |
| 13.12.2019 | Wheel nut | BA40.10-N-1002-01TS |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Information on tires/rims | Model 907 | AH40.10-P-9411-01A | |
| General information on rim/tire conversions | AH40.10-P-1050-01A | ||
| Notes on lug bolts | AH40.10-N-1005-01A | ||
| General information on malfunctions in the brake system | AH42.30-N-2007-01A | ||
| TIREFIT tire sealant | AH40.10-P-0001-01A | ||
| Remove | |||
| 1 | Raise vehicle. | AR00.60-D-1000-04TS | |
| Special instructions for lifting and supporting vehicle | AH00.60-N-0100-01TS | ||
| 2 | Remove hub caps. | If installed. | |
| 3 | Remove wheel and tire assemblies (2). | Wheel lift |
|
| Check | |||
| 4 | Check components of wheel bolt connections for corrosion and damage. | AR40.10-D-1100-02A | |
| Paste, hot lubrication 1 kg, DBL 6879.20 | *BR00.45-Z-1005-06A | ||
| Assembly cleaner | *BR00.45-Z-1028-04A | ||
| 5 | Check tires for damage and condition. | If corresponding findings are present, ↓ Perform suitable repair measures. |
AR40.10-D-0001A |
| 6 | Check tire pressure. Tires - General information |
AH40.10-N-1020-01A | |
| If tire pressure wrong. ↓ Correct tire pressure. |
AP40.15-D-4060TS | ||
| Install | |||
| 7 | Position wheel and tire assemblies (2) and screw in wheel bolts or screw on wheel nuts. | Screw in wheel bolts or screw on wheel nuts in a cross pattern. Otherwise proper seating of the disk wheels is not guaranteed. Wheel lift |
|
| 8 | Lower vehicle. | ||
| 9 | Tighten wheel bolts or wheel nuts. | Tighten wheel bolts or wheel nuts in a cross pattern. Otherwise, proper seating of the disk wheels is not guaranteed. |
|
| *BA40.10-N-1001-01TS | |||
| *BA40.10-N-1002-01TS | |||
| 10 | Install hub caps. | If removed. | |
| 11 | Reinitialize tire pressure sensors using vehicle diagnosis system. | If one or more tires were replaced or if a wheel and tire assembly rotation was carried out from front to back or from left to right, or if one or more tire pressure sensors were replaced. | |
| Connect/disconnect diagnostic unit | AD00.00-D-2000-06TS |
| Number | Designation | Model 907 | ||
|---|---|---|---|---|
| BA40.10-N-1001-01TS | Wheel bolt | Steel rim | Nm | 240 |
| Light alloy rim | Nm | 180 | ||
| Number | Designation | Model 907 | |
|---|---|---|---|
| BA40.10-N-1002-01TS | Wheel nut | Nm | 180 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1005-06A | Paste, hot lubrication 1 kg, DBL 6879.20 | A 000 989 76 51 |
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |