Balancing Wheels - Ar40.10-D-1040TS
Model 907
| Remove | |||
| 1 | Detach complete wheels | AR40.10-D-1100TS | |
| 2.1 | Remove wheel balance weights with retaining clamp (43a) | For wheel balance weights with retaining clamp (43a). |
Fig 2 |
| 2.2 | Remove bonded wheel balance weights (43b,43c) | With bonded wheel balance weights (43b,43c). |
Fig 1 |
| 3 | Clean complete wheels | Wheel and tire assemblies must be free of any soiling and contamination. Otherwise, the measurement result will be falsified. |
|
| 4 | Balance complete wheels on stationary balancing machine | ||
| 000 588 12 21 00 Balancing machine | WS40.00-P-0024B | ||
| Install | |||
| 5 | Attach complete wheels | AR40.10-D-1100TS | |
| 6 | Perform a test drive and check complete wheels for any imbalance | If a problem arises ↓ Balance complete wheels again. |