Remove/Install Rear Wheel Hub - Ar35.20-D-0310TSR

Model 907 with rear axle 741.422/453/454/455/456 

Caution	Risk of injury  to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil	Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles.	AS00.40-Z-0001-01A
	Notes on application of flange sealants to seal major assemblies		AH00.00-P-0500-01MNE
	Remove
1	Remove rear axle shaft (13).		AR35.30-D-0620TSR
2	Remove rear axle brake disk.		AR42.10-D-0240TS
3	Remove wheel hub (7).		AR35.20-D-0310-04TSR
		Claw-type wrench	Fig 4
4	Remove sensor rotor (1).	If the sensor rotor (1) or wheel bearing (4) is replaced.
5	Remove radial shaft sealing ring (2).	If the radial shaft sealing ring (2) or wheel bearing (4) is replaced.
6	Remove spacer ring (3).	If the wheel bearing (4) is replaced.
7	Remove wheel bearing (4).	If the wheel bearing (4) is replaced.
		Internal extractor	Fig 7
		Counter stay	Fig 2
	Install
Warning	Risk of injury  . Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
8	Replace thrust ring.		AR35.20-D-0310-05TSR
	000 588 00 84 00 Heat gun		WS54.00-P-0049B
9	Install wheel bearing (4).	If the wheel bearing (4) is replaced. To do so, replace spacer ring (3). MB multipurpose grease, 400 g	*BR00.45-Z-1017-06A
10	Clean contact surfaces on wheel hub (7) to radial shaft sealing ring (2).	Cold degreasing agent/cold cleaning solvent HAKU 1025-920	*BR00.45-Z-1051-04A
11	Seal contact surfaces on wheel hub (7) to radial shaft sealing ring (2).	If the radial shaft sealing ring (2) or wheel bearing (4) is replaced. Sealant, Hylomar universal sealant 80 ml	*BR00.45-Z-1010-01A
12	Install radial shaft sealing ring (2).	If the radial shaft sealing ring (2) or wheel bearing (4) is replaced. Drift	Fig 1
13	Clean contact surfaces on wheel hub (7) to sensor rotor (1).	Cold degreasing agent/cold cleaning solvent HAKU 1025-920	*BR00.45-Z-1051-04A
14	Seal contact surfaces on wheel hub (7) to sensor rotor (1).	If the sensor rotor (1) or wheel bearing (4) is replaced. Sealant, Hylomar universal sealant 80 ml	*BR00.45-Z-1010-01A
15	Install sensor rotor (1).	If the sensor rotor (1) or wheel bearing (4) is replaced. Drift	Fig 6
16	Install wheel hub (7).		AR35.20-D-0310-04TSR
		Inner slotted nut, wheel hub to axle tube	*BA35.20-N-1001-06C
		Outer slotted nut, wheel hub to axle tube	*BA35.20-N-1002-06C
		MB multipurpose grease, 400 g	*BR00.45-Z-1017-06A
		Claw-type wrench	Fig 4
17	Adjust wheel bearing play.		AR35.20-D-0310-06TSR
		Play of wheel bearings in wheel hub	*BE35.20-N-1001-02B
		Outer slotted nut, wheel hub to axle tube	*BA35.20-N-1002-06C
		Dial gage	Fig 3
		Dial indicator holder	Fig 5
		Claw-type wrench	Fig 4
18	Install rear axle brake disk.		AR42.10-D-0240TS
19	Install rear axle shaft (13).		AR35.30-D-0620TSR

TEST VALUES FOR WHEEL HUB

Number	Designation		Rear axle 741.413/414/416/42 0/422/453/454/455/4 56, rear axle 741.429 with code ZL3
BE35.20-N-1001-02B	Play of wheel bearings in wheel hub	mm	0,02...0,04

HUB

Number	Designation		Rear axle 741.422/453/454/45 5/456
BA35.20-N-1001-06C	Inner slotted nut, wheel hub to axle tube	Nm	300

HUB

Number	Designation		Rear axle 741.422/453/454/45 5/456
BA35.20-N-1002-06C	Outer slotted nut, wheel hub to axle tube	Nm	250

Fig 1: Drift (741 589 03 15 00)

Fig 2: Counter Stay (000 589 34 33 00)

Fig 3: Dial Page (001 589 53 21 00)

Fig 4: Claw-Type Wrench (906 589 00 07 00)

Fig 5: Dial Indicator Holder (363 589 02 21 00)

Fig 6: Drift (741 589 05 15 00)

Fig 7: Internal Extractor (000 589 31 33 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-01A	Sealant, Hylomar universal sealant 80 ml	A 001 989 25 20
BR00.45-Z-1017-06A	MB multipurpose grease, 400 g	A 001 989 34 51 11
BR00.45-Z-1051-04A	Cold degreasing agent/cold cleaning solvent HAKU 1025-920	Chemische Werke Kluthe GmbH Gottlieb-Daimler-Str. 12 69115 Heidelberg Germany Tel. +49 6221 5301-0 Fax +49 6221 5301-176 http://kluthe.com