Remove/Install Inertization Cartridge - AR86.10-P-0106LF
Model 217 with engine 157, 176, 177, 276, 278, 279
with code 2U8 (Alternative refrigerant)
Model 222 with engine 157, 176, 177, 256, 276, 277, 278, 279
with code 2U8 (Alternative refrigerant)
MODIFICATION NOTES
| 22.05.2018 | Special tool added. | Step 4 |
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical components to temperatures above 100°C or 212°F. Disconnect current supply when working on such components. | AS91.00-Z-0008-01A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Disconnect ground line from battery. | AR54.10-P-0003LF | |
| 2 | Remove front left fender liner. | AR88.10-P-1300LF | |
| 3 | Remove clamp of the piping (4) and remove piping (4) from connection of the inerting system cartridge (1). | ||
| 4 | Disconnect electrical connection (5) | Fig 1 | |
| 5 | Remove retaining clip (3). | ||
| 6 | Unscrew screws (2) and remove inerting system cartridge (1) with bracket. | *BA86.10-P-1001-03G | |
| 7 | Install in the reverse order. |
INERTING
| Number | Designation | Model 217 | Model 222 | ||
|---|---|---|---|---|---|
| BA86.10-P-1001-03G | Screw/bolt, pressure medium reservoir to body | M8 | Nm | 23 | 23 |