Remove/Install Electric Parking Brake Control Unit - AR42.20-P-0610LC
Model 217.4
up to model year 2018
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove rear fuse and relay module (8) from mounting bracket (9) and lay down to side toward rear with electrical lines connected | AR54.15-P-0001LF | |
| 2 | Unclip electric parking brake control unit (N128) in upward direction | ||
| 3 | Disconnect electrical connector from control unit for electric parking brake (N128) | ||
| 4 | Install in the reverse order | ||
| 5 | Commission control unit for electric parking brake (N128) | When replacing control unit for electric parking brake (N128). | |
| AD00.00-P-2000-04B |