Remove/Install Front Floor Covering (Right) - AR68.20-P-2070LC

MODEL 217 

Fig 1: Front Floor Covering (Right) Component Location - Model 217

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unscrew bolts on guide rails from right front seat		AR91.10-P-1000LF
2	Move right front seat all the way back
3	Switch off ignition and remove transmitter key
4	Remove cover below right dashboard		AR68.10-P-1520LF
5	Remove right door sill (2)		AR68.30-P-4100LC
6	Remove edge guard (3) in area of floor covering (1) at front
7	Tilt right front seat toward rear and secure
8	Remove right front floor covering (1)	Use assembly wedge in center console area. : Position floor covering (1) below center console. Mounting wedge	Fig 2
9	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA