Remove/Install Steering Wheel - AR46.10-P-0100S

Model 223

MODIFICATION NOTES

09.03.2023

Replace screw (3).

Operation step 4.

G16191373

Courtesy of MERCEDES-BENZ USA

Shown on model 223.### 1#

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Turn steering wheel (1) to center position.	The front wheels must be in the straight-ahead position.
2	Remove driver airbag from steering wheel (1).		AR91.60-P-0663S
3	Release and disconnect electrical connector (2).
4	Counterhold steering wheel (1) and remove screw (3).	Replace screw (3).
		Screw/bolt, steering wheel to steering shaft	*BA46.10-P-1001-02J
5	Remove steering wheel (1).	Model 223.### 1# Installation: The steering wheel markings (4) must line up with the steering shaft markings (5). The steering shaft markings (5) are single-line markings. Model 223.### 2# Installation: The steering wheel markings (4) must line up with the steering shaft markings (5). The steering shaft markings (5) are double-line markings.
6	Install in the reverse order.

STEERING WHEEL

Number	Designation		Model 223
BA46.10-P-1001-02J	Screw/bolt, steering wheel to steering shaft	Nm	80