Remove/Install Seat Backrest Trim - AR91.10-P-1912S

Model 223 

with code 735 (Additional scope of trim elements) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Release respective front seat and tilt forwards with connected electric lines.		AR91.10-P-1000S
2	Remove display in rear passenger compartment.	Model 223 with code 735 (Additional scope of trim elements) with code 854 (Rear Seat Entertainment System Plus) Model 223 with code 735 (Additional scope of trim elements) with code 864 (Rear compartment entertainment package)	AR82.60-P-7720S
3	Unclip cover (1).	Model 223 with code 735 (Additional scope of trim elements) with code 854 (Rear Seat Entertainment System Plus) Model 223 with code 735 (Additional scope of trim elements) with code 864 (Rear compartment entertainment package)
		Extraction hook	Fig 1
4	Unclip trim strip (2) using suitable tool (arrows A, B) and remove until electrical connectors (3) are accessible.	Increased force required when unclipping trim strip (2).
		Do not damage lighting element of trim strip (2).
5	Release and disconnect electrical connectors (3) and remove trim strip (2).
	Check
6	Check trim strip (2) for damage.	If trim strip (2) was damaged, ↓ Replace trim strip (2).
7	Remove bolts (5).
8	Unhook and remove seat backrest trim (4).
9	Install in the reverse order.

Fig 1: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA