Remove/Install Outer Trim On Seat Frame - AR91.10-P-1201S

Model 223 

Shown with code 562 (Driver seat belt buckle with integrated tensioning function) 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Move front seat (1) to its foremost and upmost position.
2	Unclip cover for seat belt end fitting and remove.	When removing paneling (2, 6).
		Check seat belt end fitting cover is correctly seated.
		Extraction hook	Fig 1
3	Remove seat belt end fitting.	When removing paneling (2, 6).
		Model 223 with code 562 (Driver seat belt buckle with integrated tensioning function)	AR91.40-P-1030-02SA
		Model 223 except code 562 (Driver seat belt buckle with integrated tensioning function)	AR91.40-P-1030-02S
4	Unclip and remove trim (4).	Make sure that the trim (4) is seated correctly.
5	Unclip trim (3), slide forwards and remove.	Make sure that the trim (3) is seated correctly.
6	Unclip and remove trim (2).	Model 223 with code 562 (Driver seat belt buckle with integrated tensioning function)
		Guide seat belt end fitting through trim (2).
		Make sure that the trim (2) is seated correctly.
7	Remove screw (5).
8	Unclip and remove trim (6).	Make sure that the trim (6) is seated correctly.
9	Install in the reverse order.

Fig 1: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA