Remove/Install Left Or Right Seat Belt In Rear Passenger Compartment - AR91.40-P-0682SA
Model 223
with code 223 (Electric backrest adjustment and head restraints)
except code 224 (Individual rear seats)
except code Z07 (B7 armoring on special protection version)
Model 223
with code 223 (Electric backrest adjustment and head restraints)
with code 224 (Individual rear seats)
except code Z07 (B7 armoring on special protection version)
MODIFICATION NOTES
| 11.10.2023 | Bolt, rear seat belt retractor | Model 223 except code Z07 (B7 armoring for special protection version) | BA91.40-P-1009-01T |
Shown with code 223 (Electric rear seat backrest adjustment and head restraints) and with code 224 (Individual rear seat system design)
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°c or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Risk of injury . Injury may result when the tension in the spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | AS91.00-Z-0002-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Remove seat backrest. | AR91.12-P-1713SA | |
| 2 | Disconnect ground line of battery of 12 V onboard electrical system. | AR54.10-P-0051S | |
| 3 | Remove trim strip behind rear seat. | AR68.30-P-1460S | |
| 4 | Remove trim from C-pillar. | AR68.30-P-4490S | |
| 5 | Place damping (1) over seat belt retractor (2) to one side. | ||
| 6 | Disconnect electrical connector (3). | ||
| 7 | Unscrew bolt (4). | *BA91.40-P-1011-01T | |
| 8 | Remove screw (5). | *BA91.40-P-1009-01T | |
| 9 | Open seat belt guide (6). | ||
| 10 | Remove seat belt retractor (2) with seat belt (7). | ||
| 11 | Install in the reverse order. | ||
| Check | |||
| 12 | Check Supplemental Restraint System (SRS) using vehicle diagnosis system. | ||
| AD00.00-P-2000-06FR |
SEAT BELTS AND EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 223 except code Z07 (B7 armoring on special protection version) |
|
|---|---|---|---|
| BA91.40-P-1009-01T | Screw, rear belt retractor | Nm | 40 |
SEAT BELTS AND EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 223 except code Z07 (B7 armoring on special protection version) |
|
|---|---|---|---|
| BA91.40-P-1011-01T | Bolt/nut for rear belt end fitting | Nm | 35 |